 |
 |
SPC SDM 800 is a premium quality engine crankcase oil developed for use in high performance diesel engines to provide outstanding performance and protection.
Benefits
SPC SDM 800 minimises maintenance cost, extend engine life and protection by:
- Keeping the engine parts exceptionally clean. Maximising oil drain period and maintenance period. Resisting sludge formation. Protecting against rust and corrosion. Extending oil filter life. Providing good anti-wear protection. Providing excellent control of oil consumption.
Application
SPC SDM 800 is recommended for use in all kinds of diesel engines including supercharged models operating under severe conditions. It can be used where oil quality of API CF-4/SG level and below is specified.
Performance Standards
SPC SDM 800 meets the following performance requirements:
- API Service CF-4/SG, CE/SG
- VW 505, CCMC PD-2 (SAE 15W40, SAE 20W50)
- Mack EO-K/2, Allison C3/C4, MB P227.5 (SAE 30, 40)
- VW 501/505, CCMC D4/PD2/G4, MAN 270/271 (SAE 30, 40)
|
TYPICAL CHARACTERISTICS
|
| SAE Grade |
10W |
30 |
40 |
15W40 |
20W50 |
| Viscosity, Kinematic |
| >at 40 deg C, cSt |
47 |
98 |
150 |
114 |
175 |
| >at 100 deg C, cSt |
7.3 |
10.3 |
15.2 |
14.5 |
19.1 |
| Viscosity, Kinematic |
| >at -15 deg C, cP |
- |
- |
- |
- |
8500 |
| >at -20 deg C, cP |
- |
- |
- |
6000 |
- |
| >at -25 deg C, cP |
6000 |
- |
- |
- |
- |
| Viscosity Index |
118 |
102 |
102 |
137 |
124 |
| Flash Point, COC, deg C |
230 |
230 |
230 |
220 |
230 |
| Pour Point, deg C |
-18 |
-18 |
-15 |
-15 |
-21 |
| TBN, mgKOH/g |
11.0 |
11.0 |
11.0 |
11.0 |
11.0 |
| Specific Gravity, 15/15 deg C |
0.889 |
0.889 |
0.899 |
0.889 |
0.899 |
|
